Telecamere ad alta velocità


Small, flexible, and easy to use, the Miro C110 is the perfect analytical tool. With a 1.3 Megapixel sensor, it achieved 800 frames-per-second (fps) at full 1280 x 1024 resolution, and up to 29,840 at reduced resolutions.


Maximum speed at full resolution of 1280 x 1024 is 800 fps. Maximum speed at reduced resolution of 128 x 8 is 29,840 fps. Minimum frame rate at all resolutions is 100 fps.

Sensor Specifications

CMOS sensor, 1280 x 1024 pixels, 5.6 µm pixel size, 9.18 mm diagonal, 12-bit depth, ISO Monochrome 2,500D; 5,000T, Color 640D; 640T adjustable


5 µs minimum exposure


8GB internal RAM

Record Times

5.0 seconds at maximum frame rate, 12-bit depth, largest resolution and into maximum internal memory (8GB)

Special Features

Segment memory for up to 63 cines in multi-cine mode, Image-Based Auto-Trigger, Continuous recording, Memory gate, Event marking, Frame timestamp, IRIG In (modulated or unmodulated), IRIG Out (unmodulated), Secondary IP address, Field-based firmware upgrade capable


Programmable trigger location (pre/post trigger recording), Image-Based Auto-Trigger standard, Trigger from software

Timing & Synchronization

20ns timing accuracy, Frame synchronization to internal or external clock (FSYNC), IRIG In (modulated or unmodulated), IRIG Out (unmodulated)


Individuals BNC for Trigger, and two programmable BNC ports: I/O 1 default setting (FSYNC), I/O 2 default setting (Strobe)

Ethernet Connection

Gb Ethernet for control and data, using standard Ethernet connection

Camera Control

Phantom Camera Control software (PCC), SDK available

Video Out

SDI available through BNC on the back of the camera


1" C-lens mounts, reversable to accept CS lenses.

Video Processing

Brightness, Gain, Gamma, Saturation, Hue, White Balance, Color interpolation algorithm, Flare, Pedestal, Tone curve, Filters, Color matrix, Image flip and rotate, Crop, Scale

Data Acquisition

National Instruments M- and X-Series DAQ modules with integrated support in PCC

Motion Analysis

Basic measurements via Phantom Application:
Distance, Speed, Acceleration, Angles and Angular Speed, Manual and Automatic point collection for target tracking, Compatible with 3rd party solutions

Supported File Formats

Cine, Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX


16 – 28 VDC, 12 W, 65 Watt 100 – 240 VAC power supply included

Mechanical Specifications

2.9 x 3.65 x 3.25 inches, 73 x 93 x 82.5 mm (H x W x D), Weight: 1.2 lbs, 0.54 kg

Environmental Specifications

Operating Temperature: 0°C – 50°C, Storage Temperature: -20°C to +70°C


Phantom SDK, LabView, MatLab

Ships Standard With

Power supply, Ethernet cable, BNC cable, Phantom PCC software, Getting Started Guide


Telecamere ad alta velocità

Informazioni tecniche

Rugged e compatta, la Phantom VEO è la soluzione definitiva in grado di gestire una vasta gamma di applicazioni scientifiche, industriali e balistiche.

La Phantom VEO dispone di frame rate superiori ai 7.000 fps con un Megapixel di risoluzione, le versioni VEO 710 e 410 sono più indicate per gestire eventi particolarmente veloci, mentre i modelli VEO 640 e 340 con sensore da quattro megapixel sono l’ideale per applicazioni che richiedono un’elevata risoluzione….