.
Telecamere ad alta velocità

VEO 710

 

Phantom VEO cameras are compact, rugged and full of premium features. The 710 model captures at over 7,000 frames-per-second at one megapixel resolution.

Programmable I/O, SDI video, Canon EOS lens support and optional CFast 2.0 recording media are just a few of the features you will appreciate.

Available in both L and S styles.

 

Throughput/Speed

7 Gpx/s, Max speed at full resolution of 1280 x 800 is 7400 fps, Max speed at reduced resolution of 64 x 8 is 680,000 fps (standard), 1,000,000 fps (requires export controlled FAST option), Min frame rate of 24 fps

Sensor Specifications

CMOS sensor, 1280 x 800 pixels, 20 µm pixel size, 25.6 mm x 16.0 mm, 12-bit depth, ISO Monochrome 6,400 D, ISO Color 2,000 D, E.I range 2,000 – 10,000 (color); 6,400 – 32,000 (mono), CAR in 64 x 8 increments, TE cooled

Exposure

1 µs minimum exposure standard, 300 ns minimum exposure with FAST option (export controlled), Global electronic shutter, Exposure Index (E.I.) for controlling apparent ISO, Extreme Dynamic Range (EDR), Auto Exposure, Shutter Off mode for PIV

Memory

18 GB, 36 GB, 72 GB high-speed internal RAM, On-board removable CFast 2.0 cards (S-models) up to 512GB

Record Times

6.5 seconds at maximum frame rate, largest resolution and into maximum internal memory

Special Features

10Gb Ethernet (optional), Segment memory for up to 63 cines in multi-cine mode, Continuous recording, Programmable I/O, HD-SDI and HDMI video, Event marking, Frame timestamp (IRIG or SMPTE), IRIG in/out (modulated and unmodulated), Shutter off mode for PIV exposure, 395 ns straddle time, Standard Internal mechanical shutter for automatic/remote Current Session Reference (CSR), Image-Based Auto-Trigger (IBAT), One 12 VDC, 6W auxiliary power port, Secondary IP address, Field-based firmware upgrade capable

Triggering

Programmable trigger location (pre/post trigger recording), Image-Based Auto-Trigger standard, Trigger from software, Trigger from on-camera controls (S-model), Hardware trigger BNC

Timing & Synchronization

20 ns timing accuracy, Frame synchronization to internal or external clock (FSYNC), IRIG in/out (modulated or unmodulated)

Signaling

Dedicated Trigger and Timecode In BNCs on camera body, Range Data input on S-model camera body (Fischer), Programmable I/O ports includes adjustable (assign and define) signals including F-sync, strobe, event, trigger output, ready and more

Ethernet Connection

Gb Ethernet (standard);
10Gb Ethernet (optional), for control and data downloads. Fischer port on S-models; RJ45 port on L-models

Camera Control

On-Camera Controls (OCC) on S-model camera, Phantom Camera Control software (PCC), SDK available

Video Out

3G HD-SDI and HDMI on all VEO models.
Additional 3G HD-SDI BNC port on back of S-model.
Supports up to 1080p60.

Lensing

Nikon F-mount standard, supports F & G style lenses, Canon EOS mount optional, PL-mount optional, C-mount optional
(lens not included)

Video Processing

Brightness, Gain, Gamma, Saturation, Hue, White Balance, Color interpolation algorithm, Flare, Pedestal, Tone curve, Filters, Color matrix, Image flip and rotate, Crop, Scale

Data Acquisition

National Instruments M- and X-Series DAQ modules with integrated support in PCC

Motion Analysis

Basic measurements via Phantom Application:
Distance, Speed, Acceleration, Angles and Angular Speed, Manual and Automatic point collection for target tracking, Compatible with 3rd party solutions

Supported File Formats

Cine, Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX

Power

100 – 240 VAC, 16-32 VDC via primary power input.
80 Watt 24V power supply included, Secondary power input, down to 12V via capture port on S-model cameras

Mechanical Specifications

Size (without lens): 5.0 x 5.0 x 5.0 inches (L x W x H); 12.7 x 12.7 x 12.7 cm, Weight: 5.6 lbs (2.5 kg)

Environmental Specifications

Operating Temperature: -10 to +50 C, Shock:MIL-STD-202G Method 213-B. Rated 30G with shutter; 100G without shutter; sawtooth wave, 11ms, +/- 10 pulses all axes (60 total), Vibration: Rated 12Grms; Figure 2A-1, Test Condition D, 15 min per axis (without lenses)

APIs

Phantom SDK, LabView, MatLab

Ships Standard With

Power supply, Ethernet cable, SDI DIN Cable, Phantom PCC software, Getting Started Guide

Options

C-mount, Canon EOS lens mount, PL-mount

Popular Accessories

Handle, Cheese Plate, Battery mounts (S-models), Cameo VEObob for added power outputs and remote port (S-model), Case with custom foam

Applicazioni

Telecamere ad alta velocità

Informazioni tecniche

Rugged e compatta, la Phantom VEO è la soluzione definitiva in grado di gestire una vasta gamma di applicazioni scientifiche, industriali e balistiche.

La Phantom VEO dispone di frame rate superiori ai 7.000 fps con un Megapixel di risoluzione, le versioni VEO 710 e 410 sono più indicate per gestire eventi particolarmente veloci, mentre i modelli VEO 640 e 340 con sensore da quattro megapixel sono l’ideale per applicazioni che richiedono un’elevata risoluzione….
Continua