.
Telecamere ad alta velocità

V1840

The Phantom v1840 provides excellent 4Mpx image quality while reaching 4,510 fps at full resolution of 2048×1952. It has dynamic range of 64.1dB and noise of only 7.2e- for clear, detailed images. The v1840 has up to 5 operating modes for maximum flexibility: Standard, High Speed (HS), High Speed Bright Field, Standard Binned and High Speed Binned. (binned modes are available in Monochrome cameras only)

Throughput/Speed

18 Gpx/s
max speed at full resolution of 2048 x 1952 is 4,510 fps.
Max speed at full resolution of 1024 x 976 in the Binned mode is 17,240 fps
Minimum frame rate is 100 fps

Sensor Specifications

CMOS Sensor
2048 x 1952 pixels
13.5 µm pixel size
27 µm pixel size – Binned Modes
27.6 mm x 26.3 mm
12-bit depth
TE and heat pipe cooled
CAR in 128 x 8 increments,
128 x 16 in Binned modes
Standard Mode:
ISO Monochrome 16,000D,
E.I. range 16,000-80,000D;
ISO Color 3,200D,
E.I. range 3,200-16,000D;
High Speed Mode:
ISO Monochrome 12,500D,
E.I. range 12,500-64,000D;
ISO Color 3,200D,
E.I. range 3,200-16,000D;
High Speed Bright Field Mode:
ISO Monochrome 2,500D,
E.I. range 2,500-12,500D;
ISO Color 500D,
E.I. range 500-2,500D;
Standard Binned Mode:
ISO Monochrome 25,000D,
E.I. range 25,000-125,000D;
High Speed Binned Mode:
ISO Monochrome 25,000D,
E.I. range 25,000-125,000D;

Exposure

1 µs minimum exposure standard, 499ns minimum exposure in Standard mode and 142ns minimum exposure in HS mode with FAST option (export controlled)
Global electronic shutter
Extreme Dynamic Range (EDR)
Auto Exposure
Shutter Off mode for PIV

Memory

72 GB, 144 GB, 288 GB high-speed internal RAM. CineMag IV for non-volatile storage (1 TB, 2 TB)

Record Times

10.6 seconds at maximum frame rate, 12 bits, 2048 x 1952 resolution and into maximum internal memory
Longer record times are available when recording directly to a CineMag at lower frame rates

Special Features

10Gb Ethernet standard
Segment memory for up to 63 cines in multi-cine mode
Continuous recording
Memory gate
Event marking
Frame timestamp
IRIG In (modulated and unmodulated)
IRIG Out (unmodulated)
Sync-to-Trigger
GPS input for GPS timing, latitude & longitude
Shutter off mode for PIV exposure
490 ns straddle time – Standard and Standard Binned modes,
696 ns straddle time – HS, HS Bright Field and HS binned modes
Burst mode
Internal mechanical shutter for automatic/remote Current Session Reference (CSR)
Secondary IP address
Field-based firmware upgrade capable

Triggering

Programmable trigger location (pre/post trigger recording)
Image-Based Auto-Trigger standard
Trigger from software
Hardware trigger BNC

Timing & Synchronization

11.36ns timing accuracy
Frame synchronization to internal or external clock (FSYNC)
IRIG In/out
Ready output (high when camera is armed and ready to record)
Strobe output (low during frame exposure time)

Signaling

Programmable I/O ports includes adjustable (assign and define) signals including F-sync, strobe, event, trigger output, ready and more
Dedicated FSYNC, Trigger, Timecode In, Timecode Out, and Strobe BNCs on camera body
Range Data input on camera body
Remote port
GPS input for GPS timing, longitude & latitudeCapture connector (Available signals: Event, Trigger, Strobe, Ready, IRIG In, IRIG Out, Video Out, Serial Port, Power Out, A-Sync (IBAT Trigger), Pretrigger/Memgate)

Ethernet Connection

Gb Ethernet 10 Gb Ethernet for both control and data

Camera Control

On-Camera Controls standard
Phantom Camera Control software (PCC)
Remote Control Unit (RCU), connects to Remote port
SDK available

Video Out

Analog video (NTSC or PAL) available on Break-out-Box
Two HD-SDI ports on camera
Component viewfinder port

Lensing

Nikon F-mount standard, supports F & G style lenses
Canon EOS mount optional
C-mount optional
(lens not included)

Video Processing

Brightness
Gain
Gamma
Saturation
Hue
White Balance
Color interpolation algorithm
Flare
Pedestal
Tone curve
Filters
Color matrix
Image flip and rotate
Crop
Scale

Data Acquisition

National Instruments M- and X-Series DAQ modules with integrated support in PCC

Motion Analysis

Basic measurements via Phantom Application:
Distance
Speed
Acceleration
Angles and Angular Speed
Manual and Automatic point collection for target tracking
Compatible with 3rd party solutions

Supported File Formats

Cine, Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX

Power

100 – 240 VAC, 220 Watt power supply included
20 – 28 VDC backup battery input on camera back panel

Mechanical Specifications

11 x 7.5 x 7.43 inches, 28 x 19 x 18.88 cm (L, W, H) without handle or lens. Handle adds 2.24"(5.7 cm) to height.
Weight: 17 lbs, 8 oz, 8.1 kg

Environmental Specifications

Operating Temperature: -10 to +50 C
10G Operating Temp: +5 – +50 C
Storage Temperature: -20 to + 70 C
Humidity: 95% non-condensing
Altitude:
Operational: 0 to 10 k feet above sea level
Non-Operational: -500 to 50 k feet above sea level
Regulatory(EMI/EMC/ESD):
Emissions: EN 61326-1, FCC part 15
Immunity: EN 61326-1
Random Vibration:
Operational:7.5 Grms, 3axes, IAW MIL-STD-202G.
Shock:
Operational: 5.5G, 11mSec sawtooth, 3 axes,60 pulses total.
Non-Operational: 30G, 11mSec sawtooth, 3 axes,60 pulses total.
Safety: IEC 60950

APIs

Phantom SDK
LabView
MatLab

Ships Standard With

Power supply
Fischer Ethernet cable
10G Ethernet cable
Phantom PCC software
Getting Started Guide

Options

FAST option
Canon EOS lens mount
PL-mount

Popular Accessories

CineMag IV
CineStation for CineMag IV
Video monitor for use with on-camera controls