Throughput/Speed |
22 Gpx/s
Max speed at full resolution of 1280 x 800 is greater than 22,000 fps
Max speed at reduced resolution of 128 x 32 is 1,000,000 fps (requires export controlled FAST option), 651,150 fps without the FAST option
Record direct to CineMag at up to 1Gpx/second
Minimum frame rate of 100 fps
|
Sensor Specifications |
CMOS sensor
1280 x 800 pixels
28 µm pixel size
35.8 mm x 22.4 mm
12-bit depth
ISO Monochrome 32,000D; 100,000T
ISO Color 6,400D; 10,000T
TE and heat pipe cooled
CAR in 128 x 16 increments
E.I. range 32,000-160,000D (mono);6,400-32,000D (Color)
|
Exposure |
1 µs minimum exposure standard, 290 ns minimum exposure with FAST option (export controlled)
Global electronic shutter
Extreme Dynamic Range (EDR)
Auto Exposure
Shutter Off mode for PIV
|
Memory |
72 GB, 144 GB, 288 GB high-speed internal RAM. CineMag IV for non-volatile storage (1 TB, 2 TB)
|
Record Times |
8.7 seconds at maximum frame rate, 12 bits, 1280×800 resolution and into maximum internal memory
Longer record times are available when recording directly to a CineMag at lower frame rates
|
Special Features |
Segment memory for up to 63 cines in multi-cine mode
Continuous recording
Frame rate profile
Memory gate
Event marking
Frame timestamp (IRIG or SMPTE)
IRIG In (modulated and unmodulated)
IRIG Out (unmodulated)
Shutter off mode for PIV exposure
400 ns straddle time
Burst mode
Internal mechanical shutter for automatic/remote Current Session Reference (CSR)
Sync-to-Trigger
Secondary IP address
Field-based firmware upgrade capable
|
Triggering |
Programmable trigger location (pre/post trigger recording)
Image-Based Auto-Trigger standard
Trigger from software
Hardware trigger BNC
|
Timing & Synchronization |
18ns timing accuracy
Frame synchronization to internal or external clock (FSYNC)
IRIG In/out
Ready output (high when camera is armed and ready to record)
Strobe output (low during frame exposure time)
|
Signaling |
Capture connector (Available signals: Event, Trigger, Strobe, Ready, IRIG In, IRIG Out, Video Out, Serial Port, Power Out, A-Sync (IBAT Trigger), Pretrigger/Memgate)
Break-out-Box compatible (IRIG-in, IRIG-out, NTSC/PAL Video, Trigger, Event, Strobe, A-Sync, Pre-Trigger/Memgate, Ready) Note: cannot power the camera from the BoB
Capture cable (Ready, Strobe, A-Sync, Pre-trigger, Video)
Dedicated FSYNC, Trigger, Timecode In, Timecode Out, and Strobe BNCs on camera body
Range Data input on camera body
Remote port
GPS input for GPS timing, longitude & latitude
|
Ethernet Connection |
Gb Ethernet for both control and data
10 Gb Ethernet via CineStream X2SR
|
Camera Control |
On-Camera Controls standard
Phantom Camera Control software (PCC)
Remote Control Unit (RCU), connects to Remote port
SDK available
|
Video Out |
Analog video (NTSC or PAL) available on Break-out-Box
Two HD-SDI ports on camera
Component viewfinder port
|
Lensing |
Nikon F-mount standard, supports F & G style lenses
Canon EOS mount optional
C-mount optional
(lens not included)
|
Video Processing |
Brightness
Gain
Gamma
Saturation
Hue
White Balance
Color interpolation algorithm
Flare
Pedestal
Tone curve
Filters
Color matrix
Image flip and rotate
Crop
Scale
|
Data Acquisition |
National Instruments M- and X-Series DAQ modules with integrated support in PCC
|
Motion Analysis |
Basic measurements via Phantom Application:
Distance
Speed
Acceleration
Angles and Angular Speed
Manual and Automatic point collection for target tracking
Compatible with 3rd party solutions
|
Supported File Formats |
Cine, Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX
|
Power |
100 – 240 VAC, 220 Watt power supply included
20 – 28 VDC backup battery input on camera back panel
|
Mechanical Specifications |
11 x 7.5 x 7.43 inches, 28 x 19 x 18.88 cm (L, W, H) without handle or lens. Handle adds 2.24"(5.7 cm) to height.
Weight: 17 lbs, 8 oz, 8.1 kg
|
Environmental Specifications |
Operating Temperature: -10 to +50 C
10G Operating Temp: +5 – +50 C
Storage Temperature: -20 to + 70 C
Humidity: 95% non-condensing
Altitude:
Operational: 0 to 10 k feet above sea level
Non-Operational: -500 to 50 k feet above sea level
Regulatory(EMI/EMC/ESD):
Emissions: EN 61326-1, FCC part 15
Immunity: EN 61326-1
Random Vibration:
Operational:7.5 Grms, 3axes, IAW MIL-STD-202G.
Shock:
Operational: 5.5G, 11mSec sawtooth, 3 axes,60 pulses total.
Non-Operational: 30G, 11mSec sawtooth, 3 axes,60 pulses total.
Safety: IEC 60950
|
APIs |
Phantom SDK
LabView
MatLab
|
Ships Standard With |
Power supply
Ethernet cable
Capture cable
Phantom PCC software
Getting Started Guide
|
Options |
FAST option
Canon EOS lens mount
PL-mount
|
Popular Accessories |
CineMag IV
CineStation for CineMag IV
Video monitor for use with on-camera controls
|