Telecamere ad alta velocità

MIRO 3a10

La telecamera ad alta velocità MIRO 3a10, attualmente disponibile solo in stile LAB, è una telecamera “alternativa” da 1 Mpx alla Miro 310. Essa fornisce un sensore con risoluzione 1280 x 1280 con 10 µm pixel. Alcune applicazioni beneficiano di dimensioni pixel più piccole, e questa telecamera è destinata a queste applicazioni. In realtà è una telecamera da 1,6 Mpx, può richiedere fino a 1850 fps a piena risoluzione.

Come altre fotocamere Miro, il laboratorio 3a10 dispone di opzioni di innesto obiettivo intercambiabili per ospitare obiettivi Nikon, PL, C e Canon EF (con controllo elettronico).

La telecamera è a marca Vision Phantom.

Scopri le altre telecamere ad alta velocità.

Throughput/Speed

3.2 Gpx/s, Maximum speed at full resolution of 1280 x 1280 is 1850 fps, Maximum speed at reduced resolution of 64 x 8 is 325,000 fps, Minimum frame rate of 24 fps, Shutter speeds down to 1 microseconds

Sensor Specifications

CMOS sensor, 1280 x 1280 pixels, 10 µm pixel size, 12.8 mm x 12.8 mm, 12-bit depth, ISO Monochrome 5,000D; 12,500T, ISO Color 1,250D; 1,600T, TE cooled, CAR in 64 x 8 increments, Fill factor: 70%, Dynamic range: 55 dB, Read out noise at 21.6°C (typical): 21e-, Full well capacity (typical):12100e-

Exposure

1 µs minimum exposure, electronic shutter, Extreme Dynamic Range (EDR), Auto Exposure, Shutter Off mode for PIV applications

Memory

6GB, 12GB high-speed internal RAM, CineFlash support

Record Times

2.6 seconds at maximum frame rate, 12-bit depth, largest resolution into maximum internal memory

Special Features

Segment memory for up to 63 cines in multi-cine mode, Image-Based Auto-Trigger, Continuous recording, Memory gate, Event marking, Frame timestamp, IRIG In (modulated or unmodulated), IRIG Out (unmodulated), Shutter off mode for PIV exposure, 500 ns straddle time, Burst mode, Standard internal mechanical shutter for automatic/remote Current Session Reference (CSR), Secondary IP address, Field-based firmware upgrade capable

Triggering

Programmable trigger location (pre/post trigger recording), Image-Based Auto-Trigger standard, Trigger from software, Hardware trigger BNC

Timing & Synchronization

20ns timing accuracy, Frame synchronization to internal or external clock (FSYNC), IRIG In (modulated or unmodulated)

Signaling

I/O-1 can be assigned FSYNC, Event, Strobe or Memgate; I/O-2 can be assigned Ready or Strobe: IRIG-in and Trigger have dedicated BNCs (There is no analog video on this camera)

Ethernet Connection

Gb Ethernet for control and data, using standard Ethernet connection

Camera Control

Phantom Camera Control software (PCC), SDK available

Video Out

No video out

Lensing

The following mounts are available:
Canon EOS, Nikon F-mount, support F & G style lenses, Nikon F mount adapter (allows the use of F-mount lenses on EOS mount), 1" C-mount, PL-mount

Video Processing

N/A

Data Acquisition

Native Support in PCC, for National Instruments, X- and M-Series

Motion Analysis

Basic measurements via Phantom Application:
Distance, Speed, Acceleration, Angles and Angular Speed, Manual and Automatic point collection for target tracking, Compatible with 3rd party solutions

Supported File Formats

Cine, Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX

Power

12 – 28 VDC, 65 W, 100 – 240 VAC power supply included

APIs

Phantom SDK, LabView, MatLab

Ships Standard With

Power supply, Ethernet cable, Phantom PCC software, BNC cables

Options

120GB or 240GB CineFlash with Dock

Specifiche meccaniche e ambientali
Serie LCSerie R

Corpo macchina fotografica

Standard

Rugged

Controlli della telecamera

Sì, LCD touchscreen

No

Opzioni di alimentazione a batteria

Sì, BP-U30 solo per mantenere la valutazione dello shock

Compatibile con CineFlash

Shock RatingNon specificato

40G (standard) 100G (opzionale), onda a dente di sega, 11 ms, 30 volte, 3 assi (senza obiettivo e senza otturatore interno)

VibrazioniNon specificato

15 Grms, 20Hz-2KHz, tutti gli assi, 10 min/asse, secondo MIL-STD-810G

Temperatura di esercizio

0°C to +40°C @ 8% to 80% RH-10°C to +50°C @ 10% to 95% RH
Dimensione7.5 x 3.5 x 4 in; 19 x 8.8 x 10 cm senza batteria7.5 x 3.5 x 4 in; 19 x 8.8 x 10 cm senza batteria
Peso

3,0 libbre, 1,4 kg, senza CineFlash, batteria o lente

3,5 libbre, 1,6 kg, senza CineFlash, batteria o lente

Otturatore meccanico interno

StandardStandard, può essere rimosso
Acquisizione dati

Supporto nativo in PCC per gli strumenti nazionali serie X e M

Supporto nativo in PCC per gli strumenti nazionali serie X e M

Altitudine operativa

Non specificato0 – 50,000 ft, 0 – 15,240 metri

Applicazioni

Telecamere ad alta velocità Phantom VEO

Telecamera ad alta velocità Phantom VEO

Informazioni tecniche

Rugged e compatta, la Phantom VEO è la soluzione definitiva in grado di gestire una vasta gamma di applicazioni scientifiche, industriali e balistiche.

La Phantom VEO dispone di frame rate superiori ai 7.000 fps con un Megapixel di risoluzione, le versioni VEO 710 e 410 sono più indicate per gestire eventi particolarmente veloci, mentre i modelli VEO 640 e 340 con sensore da quattro megapixel sono l’ideale per applicazioni che richiedono un’elevata risoluzione….
Continua