.
Telecamere ad alta velocità

MIRO 340/341

The Miro 340 and 341 extend the Miro camera range by offering a 35mm 4 megapixel alternative. They are similar to the Miro 320 in all but two very important ways: 1) they sport a 4Mpx sensor at 2560×1600. 2) they DO NOT support any video output. Because of the lack of video, these cameras are best used in applications where the camera is controlled by software and images are viewed over Ethernet. Available in R and LAB styles only.

Throughput/Speed

340: 3.2 Gpx/s, Maximum speed at full resolution of 2560 x 1600 is 800 fps for the M340, Minimum frame rate of 24 fps, Shutter speeds down to 1 microsecond

Sensor Specifications

CMOS sensor, 2560 x 1600 pixels, 10 µm pixel size, 25.6 mm x 16.0 mm, 12-bit depth, ISO Monochrome 5,000D; 12,500T, ISO Color 1,250D; 1,600T, TE cooled, CAR in 64 x 8 increments, Fill factor: 70%, Dynamic range: 55 dB, Read out noise at 21.6°C (typical): 21e-, Full well capacity (typical): 12100e-

Exposure

1 µs minimum exposure, electronic shutter, Extreme Dynamic Range (EDR), Auto Exposure, Shutter Off mode for PIV applications

Memory

6GB, 12GB high-speed internal RAM, CineFlash support

Record Times

2.5 seconds at maximum frame rate, 12-bit depth, largest resolution and into maximum internal memory on the 340

Special Features

Segment memory for up to 63 cines in multi-cine mode, Image-Based Auto-Trigger, Continuous recording, Memory gate, Event marking, Frame timestamp, IRIG In (modulated or unmodulated), IRIG Out (unmodulated), Shutter off mode for PIV exposure, 1.4µs straddle time, Burst mode, Standard internal mechanical shutter for automatic/remote Current Session Reference (CSR), Secondary IP address, Field-based firmware upgrade capable

Triggering

Programmable trigger location (pre/post trigger recording), Image-Based Auto-Trigger standard, Trigger from software, Hardware trigger BNC

Timing & Synchronization

20ns timing accuracy, Frame synchronization to internal or external clock (FSYNC), IRIG In (modulated or unmodulated), IRIG Out (unmodulated)

Signaling

On the M, R and LC styles: Capture connector (Trigger, IRIG In, Video, IRIG Out, Aux1, Aux2), (Aux1 signal can be assigned to FSYNC, Event, Strobe or Memgate), (Aux2 signal can be assigned to Ready or Strobe), Dedicated FSYNC and, Trigger connection on camera body, In software there is an Aux3 assignment that allows IRIG, Out to be reassigned to Strobe, On the LAB style: I/O-1 can be assigned FSYNC, Event, Strobe or Memgate; I/O-2 can be assigned Ready or Strobe: IRIG-in and Trigger have dedicated BNCs

Ethernet Connection

Gb Ethernet for control and data, using standard Ethernet connection

Camera Control

Phantom Camera Control software (PCC), SDK available

Video Out

No video out available on these cameras. Images can be viewed using PCC or 3rd party software that retrieve images over Ethernet.

Lensing

The following mounts are available:
Canon EOS, Nikon F-mount, support F & G style lenses, Nikon F mount adapter (allows the use of F-mount lenses on EOS mount), 1" C-mount, PL-mount

Video Processing

N/A

Data Acquisition

Native Support in PCC, for National Instruments, X- and M-Series

Motion Analysis

Basic measurements via Phantom Application:
Distance, Speed, Acceleration, Angles and Angular Speed, Manual and Automatic point collection for target tracking, Compatible with 3rd party solutions

Supported File Formats

Cine, Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX

Power

12 – 28 VDC, 65 W, 100 – 240 VAC power supply included, Rechargeable battery (Sony BP-U30 or BP-U60), Battery not available on LAB style

APIs

Phantom SDK, LabView, MatLab

Ships Standard With

Power supply, Ethernet cable, Battery; Sony BP-U30 or BP-U60 rechargeable, external charger required (No battery with LAB style), Phantom PCC software, 120GB CineFlash and Dock (not bundled with LAB style), Mini Break-out-Box (not required with LAB style)

Options

Upgrade bundled 120GB CineFlash to 240GB, While CineFlash is available for the LAB style camera, there is no bundled CineFlash or Dock

Popular Accessories

Spare batteries, battery charger (M, R, LC only), Additional CineFlash modules

Mechanical and environmental specifications
LC Series R Series LAB Series
Camera body Standard Ruggedized Office
On-Camera Controls Yes, LCD touchscreen No No
Battery Power Options Yes Yes, BP-U30 only to maintain shock rating No
CineFlash Compatible Yes Yes Yes
Shock Rating Not specified 40G (standard) 100G (optional), sawtooth wave, 11 ms, 30 times, 3 axes (without lens and without internal shutter) 30G, half sine wave, 11ms, 10 times, 3axes (without lens)
Random Vibration Not specified 15 Grms, 20Hz-2KHz, all axes, 10 min/axis, in accordance with MIL-STD-810G Not specified
Operating Temperature 0°C to +40°C @ 8% to 80% RH -10°C to +50°C @ 10% to 95% RH 0°C to +40°C @ 8% to 80% RH
Size 7.5 x 3.5 x 4 in; 19 x 8.8 x 10 cm without battery 7.5 x 3.5 x 4 in; 19 x 8.8 x 10 cm without battery 7.5 x 3.5 x 4 in; 19 x 8.8 x 10 cm without battery
Weight 3.0 lbs, 1.4 kg, without CineFlash, battery or lens 3.5 lbs, 1.6 kg, without CineFlash, battery or lens 3.0 lbs, 1.4 kg, without CineFlash, battery or lens
Internal Mechanical Shutter Standard Standard, can be removed Standard
Junction Box Compatible Yes Yes No
Data Acquisition Native Support in PCC for National Instruments X- and M-Series Native Support in PCC for National Instruments X- and M-Series Native Support in PCC for National Instruments X- and M-Series
Operational Altitude Not specified 0 – 50,000 ft, 0 – 15,240 meters Not specified